ZyXEL Communications ZYWALL USG CLI - 31.1.2 Cellular Account Commands

Chapter 31 ISP Accounts
ZyWALL (ZLD) CLI Reference Guide
244
31.1.2 Cellular Account Commands
The following table lists the cellular ISP account commands.
[no] service-name {ip | hostname |
service_name}
Sets the service name for the specified PPPoE ISP
account. The
no command clears the service
name.
hostname: You may up to 63 alphanumeric
characters, dashes (-), or periods (.), but the first
character cannot be a period.
service_name: You can use 1-253 alphanumeric
characters, underscores (_), dashes (-), and
@$./
characters.
[no] server ip Sets the PPTP server for the specified PPTP ISP
account. The no command clears the server
name.
[no] encryption {nomppe | mppe-40 | mppe-
128}
Sets the encryption for the specified PPTP ISP
account. The no command sets the encryption to
nomppe.
[no] connection-id connection_id Sets the connection ID for the specified PPTP ISP
account. The no command clears the connection
ID.
connection_id: You can use up to 31
alphanumeric characters, underscores (_), dashes
(-), and colons (:).
Table 143 PPPoE and PPTP ISP Account Commands (continued)
COMMAND DESCRIPTION
Table 144 Cellular Account Commands
COMMAND DESCRIPTION
show account cellular profile_name Displays information about the specified account.
[no] account cellular profile_name Creates a new cellular ISP account with name
profile_name if necessary and enters sub-
command mode. The
no command deletes the
specified ISP account.
profile_name: use 0-30 alphanumeric
characters, underscores(
_), or dashes (-), but the
first character cannot be a number. This value is
case-sensitive.
[no] apn access_point_name Sets the Access Point Name (APN) for the cellular
ISP account. The
no command clears the APN.
access_point_name: Use up to 64 alphanumeric
characters and underscores (_), dashes (-),
periods (.), and
/@\$#.
[no] phone phone_number Sets the username for the specified ISP account.
The
no command clears the username.
username: Use up to 64 alphanumeric characters
and underscores (_), dashes (-), periods (.), and
/
@\$#.
[no] user username Sets the username for the specified ISP account.
The
no command clears the username.
username: Use up to 64 alphanumeric characters
and underscores (_), dashes (-), periods (.), and
/
@\$#.