ZyXEL Communications ZYWALL USG CLI - 28.2.1 ad-server Commands; 28.2.2 ldap-server Commands

Chapter 28 AAA Server
ZyWALL (ZLD) CLI Reference Guide
230
28.2.1 ad-server Commands
The following table lists the ad-server commands you use to set the default AD server.
28.2.2 ldap-server Commands
The following table lists the ldap-server commands you use to set the default LDAP
server.
Table 134 ad-server Commands
COMMAND DESCRIPTION
show ad-server Displays current AD server settings.
[no] ad-server basedn basedn Sets a base distinguished name (DN) for the default AD server. A
base DN identifies an AD directory. The
no command clears this
setting.
[no] ad-server binddn binddn Sets the user name the ZyWALL uses to log into the default AD
server.
The
no command clears this setting.
[no] ad-server cn-identifier uid Sets the unique common name (cn) to identify a record.
The
no command clears this setting.
[no] ad-server host ad_server Sets the AD server address. Enter the IP address (in dotted decimal
notation) or the domain name. The
no command clears this setting.
[no] ad-server password password Sets the bind password. The
no command clears this setting.
[no] ad-server port port_no Sets the AD port number. Enter a number between 1 and 65535. The
default is 389. The
no command clears this setting.
[no] ad-server search-time-limit
time
Sets the search timeout period (in seconds). Enter a number between
1 and 300. The
no command clears this setting.
[no] ad-server ssl Enables the ZyWALL to establish a secure connection to the AD
server. The no command disables this feature.
Table 135 ldap-server Commands
COMMAND DESCRIPTION
show ldap-server Displays current LDAP server settings.
[no] ldap-server basedn basedn Sets a base distinguished name (DN) for the default LDAP server. A
base DN identifies an LDAP directory. The
no command clears this
setting.
[no] ldap-server binddn binddn Sets the user name the ZyWALL uses to log into the default LDAP
server.
The
no command clears this setting.
[no] ldap-server cn-identifier
uid
Sets the unique common name (cn) to identify a record.
The
no command clears this setting.
[no] ldap-server host
ldap_server
Sets the LDAP server address. Enter the IP address (in dotted decimal
notation) or the domain name. The
no command clears this setting.
[no] ldap-server password
password
Sets the bind password. The
no command clears this setting.
[no] ldap-server port port_no Sets the LDAP port number. Enter a number between 1 and 65535. The
default is 389. The
no command clears this setting.