Chapter 16 SSL VPN
ZyWALL (ZLD) CLI Reference Guide
131
16.2.2 SSL Command Examples
Here is an example SSL VPN configuration.
show workspace application Displays the SSLVPN resources available to each user when logged
into SSLVPN.
show workspace cifs Displays the shared folders available to each user when logged into
SSLVPN.
Table 69 SSL VPN Commands
COMMAND DESCRIPTION
Router(config)# interface ge2
Router(config-if-ge)# ip address 10.1.1.254 255.255.255.0
Router(config-if-ge)# exit
Router(config)# interface ge3
Router(config-if-ge)# ip address 172.23.10.254 255.255.255.0
Router(config-if-ge)# exit
Router(config)# address-object IP-POOL 192.168.100.1-192.168.100.10
Router(config)# address-object DNS1 172.23.5.1
Router(config)# address-object DNS2 168.95.1.1
Router(config)# address-object NETWORK1 172.23.10.0/24
Router(config)# username tester password 1234 user-type user
Router(config)# sslvpn policy SSL_VPN_TEST
Router(policy SSL_VPN_TEST)# activate
Router(policy SSL_VPN_TEST)# user tester
Router(policy SSL_VPN_TEST)# network-extension activate
Router(policy SSL_VPN_TEST)# network-extension ip-pool IP-POOL
Router(policy SSL_VPN_TEST)# network-extension 1st-dns DNS1
Router(policy SSL_VPN_TEST)# network-extension 2nd-dns 168.95.1.1
Router(policy SSL_VPN_TEST)# network-extension network NETWORK1
Router(policy SSL_VPN_TEST)# exit
Router(config)# show sslvpn policy SSL_VPN_TEST
index: 1
active: yes
name: SSL_VPN_TEST
description:
user: tester
ssl applicaiton: none
network extension: yes
ip pool: IP-POOL
dns server 1: DNS1
dns server 2: DNS2
wins server 1: none
wins server 2: none
network: NETWORK1
reference count: 0
To Next Page
Loading...
