ZyXEL Communications ZYWALL USG CLI - Page 139

Chapter 17 L2TP VPN
ZyWALL (ZLD) CLI Reference Guide
139
• Enable the policy route.
Router(config)# policy 3
Router(policy-route)# source LAN_SUBNET
Router(policy-route)# destination L2TP_POOL
Router(policy-route)# service any
Router(policy-route)# next-hop tunnel
Default_L2TP_VPN_ConnectionRouter(policy-route)# no deactivate
Router(policy-route)# exit
Router(config)# show policy-route 3
index: 3
active: yes
description: WIZ_VPN
user: any
schedule: none
interface: ge1
tunnel: none
sslvpn: none
source: PC_SUBNET
destination: L2TP_POOL
service: any
nexthop type: Tunnel
nexthop: Default_L2TP_VPN_Connection
bandwidth: 0
bandwidth priority: 0
maximize bandwidth usage: no
SNAT: none
amount of port trigger: 0