Chapter 32 SSL Application
ZyWALL (ZLD) CLI Reference Guide
248
32.1.2 SSL Application Command Examples
The following commands create and display a server-type SSL application object named ZW5
for a web server at IP address 192.168.1.12.
server-type file-sharing
share-path share-path
Specifies the IP address, domain name or NetBIOS name (computer
name) of the file server and the name of the share to which you want
to allow user access. Enter the path in one of the following formats.
“\\<IP address>\<share name>”
“\\<domain name>\<share name>”
“\\<computer name>\<share name>”
For example, if you enter “\\my-server\Tmp”, this allows remote users
to access all files and/or folders in the “\Tmp” share on the “my-
server” computer.
server-type rdp server-
address server-address
[starting-
port <1..65535> ending-port
<1..65535>] [program-path
program-path]
Creates an SSL application object to allow users to manage LAN
computers that have Remote Desktop Protocol remote desktop
server software installed.
Specify the listening ports of the LAN computer(s) running remote
desktop server software. The ZyWALL uses a port number from this
range to send traffic to the LAN computer that is being remotely
managed.
program-path: specify an application to open when a remote user
logs into the remote desktop application.
server-type vnc server-
address server-address
[starting-
port <1..65535> ending-port
<1..65535>]
Creates an SSL application object to allow users to manage LAN
computers that have Virtual Network Computing remote desktop
server software installed.
Specify the listening ports of the LAN computer(s) running remote
desktop server software. The ZyWALL uses a port number from this
range to send traffic to the LAN computer that is being remotely
managed.
no server-type Remove the type of service configuration for this SSL application.
[no] webpage-encrypt Turn on web encrypt to prevent users from saving the web content.
Table 145 SSL Application Object Commands
COMMAND DESCRIPTION
Router(config)# sslvpn application ZW5
Router(sslvpn application)# server-type web-server url http://192.168.1.12
Router(sslvpn application)# exit
Router(config)# show sslvpn application
SSL Application: ZW5
Server Type: web-server
URL: http://192.168.1.12
Entry Point:
Encrypted URL: ~aHR0cDovLzE5Mi4xNjguMS4xMi8=/
Web Page Encryption: yes
Reference: 1
To Next Page
Loading...
