Chapter 35 File Manager
ZyWALL (ZLD) CLI Reference Guide
285
8 After the transfer is complete, “Firmware received” or “ZLD-current received” displays.
Wait (up to four minutes) while the ZyWALL recovers the firmware.
Figure 42 Firmware Received and Recovery Started
9 The console session displays “done” when the firmware recovery is complete. Then the
ZyWALL automatically restarts.
Figure 43 Firmware Recovery Complete and Restart
10 The username prompt displays after the ZyWALL starts up successfully. The firmware
recovery process is now complete and the ZyWALL is ready to use.
To Next Page
Loading...
