2gig Technologies GC2 User Manual

Burglary Protection
Copyright © 2016 Nortek Security & Control 13
5 AttheBypassedSensorsscreen,choose
oneoftheseoptions:
• Addasens
ortothebypassedlist.
TaptheBLUEbuttonthat
correspondstothedesiredsensor.
WhenthebuttonturnsYELLOW,the
systemwillbypassthesensor.
• Vi
ewOnlyBypassedSensors.Place
acheckmarkintheShowBypassed
Onlybox.
• Re
moveasensorfromthebypassed
list.TaptheYELLOWbuttonthat
correspondstothedesiredsensor.
ThebuttonturnsBLUEwhenitisno
longeronthebypassedlist.
6 Whenfinished,tapBack.
STAY MODE
UseStaymodetopartiallyarmthesystem
whenindividualswillbeoccupyingthe
premises.Thisarmsonlythesensor‐
protectedperimeterdoorsandwindows.It
leavesinteriormotionsensorsorother
interiordoorsunarmed.Inahomesetting,
Staymodeistypicallyusedduringthe
eveninghour swhenoccupantsarenolong
er
expectedtoleaveorenterthepremises.This
allowsoccupantstomoveaboutthe
premiseswithouttriggeringtheburglary
alarm.Becausealltheinteriorburglary
protectionisOFF,analarmwouldonlybe
triggeredwhenasensor‐protected
perimeterdoororwindowisopened.
Entry Delay in Stay Mode
Certainsensors,suchasadoor,canbe
configuredbyyourinstallertouseadelay
timerbeforetriggeringanalarm.This
providesawayforanauthorizedperson
returningtoenterusingapredetermined
dooranddisarmthesystembeforeanalarm
istriggered.
ToarmthesystemusinganEntr
yDelay:
1 AttheSecurityorMenuscreen,tapthe
Armbutton.
2 AttheReadytoArmscreen,placea
checkmarkintheEntryDelaybo x.Thisis
thedefaultsetting.
NOTE: Ifyouclearthecheckmarkfrom
theEntryDelaybox,analarmwill
betriggeredwhenthesensoris
openedwhilethesystemisarmed
inStaymode.
3 TapStaytoarmthesystem
NOTE: Whenre‐enteringthepremises,
theusermustenterthroughthe
door(s)programmedtousethe
EntryDelaytimer.Thisgivesthe
useraspecifiedamountoftimeto
disarmthesystem.Ifthesystemis
notdisarmedintime,analarmis
triggered.
Quick Exit in Stay Mode
Aprogrammableoption,calledQuickExit
maybedisplayedontheSecurityscreen
whilethesystemisarmedinStaymode.Tap
theQuickExitbuttontostartatimerto
allowsomeonetoexitorenterthrougha
sensor‐protecteddoorprogrammedfor
delaywithouthavingtodisarmtheentire
sy
stem.Whenthedelaytimerrunsout,the
systemreturnstothenormalStaymode.
TheQuickExitoptioncanbeturnedONor
OFFbyyourinstaller,see"Installer
ProgrammedOptions"onpage40to

2gig Technologies GC2 Specifications

General

Brand	2gig Technologies
Model	GC2
Category	Security System
Language	English