2gig Technologies GC2 User Manual

System Toolbox
Copyright © 2016 Nortek Security & Control 33
Secret Duress Button
OntheHomescreen,thesystemlogoalways
appearsinthelowerrightcorner.Thesystem
logoisthesecretduressbutton.
While Armed
Withthesystemarmed,tappingthelogo
displaysthestandarddisarmcodeentry
screen.Useavalidusercodeoraduressuser
codetodisarmthesystem.Thesystem
disarmsnormally,butasilentdure ssreport
issenttotheCentralStationandtheywill
dispatchhelp.Ifsupportedbythe2GI
G
Alarmdealer,theleftsideofthisscreenalso
displayscontactinformationforthealarm
dealerorCentralStation.
While Disarmed
Youca
nalsousethesecretduressbutton
whilethesystemisdisarmed.Tappingthe
systemlogorevealstheEnterCodescreen.
Entertheduresscodetosendasilentdure ss
reporttotheCentralStationandtheywill
dispatchhelp.Thesystemremainsdisarmed.
Ifsupportedbythe2GIGAlarmde
aler,the
leftsideofthisscreenalsodisplayscontact
informationforthealarmdealerorCentral
Station.
SYSTEM HISTORY
TheControlPanelkeepsalogofsystem
eventsintheorderinwhichtheyoccur.Each
eventismarkedwiththedateandtimethat
theeventoccurred.
Tomakereadingthelogeasier,thesystem
historydisplaycanbefilteredtoshow
selectedeventsonly.Theeventsthatcanbe
filteredforthesystemhistorylogdisplayare:
•Armordis
armofthesystem
•Bypassesofse
nsors(forcebypassesand
manualbypasses)
•Alarms(alarmsaredisplayedwithared
stripe)
•Alerts(al
ertsaredisplayedwithayellow
stripe)
Somesystemeventsalwaysdisplay
regardlessofthefiltersselected.These
eventsinclude:
•Walkte
ststartedorterminated
•Programmingmodest
artedor
terminated
Tovie
wthesystemhistorylog:
1 AttheHomescreen,tapSecurity.
2 AttheSecurityscreen,tapMenu.
3 OntheMenuscreen,tapToolbox.
4 Enteravalidusercodetoaccessthe
toolbox.
5 AttheToolbox(1of3)screen,tap
SystemHistory. Thelogofsystemev ents
appears.Usethe↑and↓arrowsto
scrollthroughthelog.
6 Tochoosetheeventstodisplay,tap
Filters.
7 Selecttheeventstodisplaywiththe
checkboxes.TapAlltoselectallthe
checkboxes,orNonetoclearallthe
checkboxes.
8 TapOkwhenfinished.

2gig Technologies GC2 Specifications

General

Brand	2gig Technologies
Model	GC2
Category	Security System
Language	English