GC2 Wireless Security System | User Guide
34 Copyright © 2016 Nortek Security & Control
SYSTEM TEST
Eventhoughyoursecuritysystemisself‐
monitoring,itisstillimportanttoregularly
testthesystemmanually.TheSystemTestis
usedtotesteachofthesensorsinthe
system.Themast erusercodeisrequiredto
testthesystem.Whilethesystemisintest
mode,a“T”ic
onblinksontheupperrightof
thedisplay.
IMPORTANT: TestyourSecuritySystem
weeklytoensurecontinuedprotection
andpropersystemoperation.
Totestthesystem:
1 AttheHomescreen,tapSecurity.
2 AttheSecurityscreen,tapMenu.
3 AttheMenuscreen,tapToolbox.
4 Toaccessthesystemtest,enterthe
masterusercode.
5 AttheToolbox(1of3)screen,tap
SystemTest.
Sensor Test
Wheneachsensoristested,theControl
Paneldoesthefollowing:
•Beepsan
dannouncesthesensor’sname
•Displaysgr
eenbarlightsbythesensor
name
•Displaysgr
eensignalbarstoshowthe
strengthofthatsensor’swirelesssignal
NOTE: Startandstoptestreportsare
senttotheCentralStation.
1 AttheSystemTest:Consolescreen,alist
ofsensorsappears.Usethe↑and↓
arrowstoscrollthroughthelist.
2 Gotoeachsensorliste d,andtriggerit.
• Fo
rdoororwindowsensors,open
andclosethedoororwindow.
• Formotiondetectors,stayoutof the
protectedareaforfive(5)minutes,
thenwalkthroughthearea.
• Fo
rportablesensorsandwireless
keypads,tapabutton.
• Forsmoke,CO,orglassbreak
detectors,tapthedetector’stest
button.
TIP: Wh
enaredbarisdisplay edforasensor,
thetesthasfailed.
3 Whenallsensorshavebeentested,
tapOK.ThencontinuewiththePanel
Test.
Panel Test
ThepaneltestcheckstheControlPanel’ s
indicatorsandsounder.
1 AttheSystemTest:Consolescreen,alist
ofteststoperformonthepanelappears.
Usethe↑and↓arrowstoscroll
throughthelis t.
2 Tapeachbuttoninthelist.ThentapYes
orNotorespondtothetestquestion.
3 Afteransweringallofthequestions,tap
OK.