2gig Technologies GC2 User Manual

GC2 Wireless Security System | User Guide
20 Copyright © 2016 Nortek Security & Control
WIRELESS KEYPAD: ARMING
AND DISARMING
Yoursystemmaybeequippedwithoneor
morewirelesskeypads.Uptofour(4)
wirelesskeypadscanbeusedtocontrolthe
systemremotelyfromthemainControl
Panel.
Twotypesofwirelesskeypadsareavailable.
Awirelesskeypadwithoutascreen,anda
wirelesstouchscreenkeypad.
Thewirelesstouch
screenkeypadoperates
virtuallythesameastheControlPanel.Each
standardwirelesskeypadhasbuttonsfor
enteringusercodes,StayandAwaymode
buttons,andFireandPoliceemergency
buttons.
ChecktheSee“InstallerProgrammed
Options”onpage40.sectioninthisguideto
verifywhich24‐hour
FireandPolice
emergencybuttonshavebeenenabledby
theinstaller.
Arm with a Keypad
Stay Mode
ToarmthesystemtoStaymodeusinga
wirelesskeypad:
1 AttheHomescreen,tapSecurity>Arm.
2 Enteravalidusercode.
3 TaptheStaybutton.
4 IfQuickArminghasbeenprogrammed
byyourinstaller,justtaptheStay
button.
NOTE: Ifanyperimeterdoororwindow
sensorsareopen,thesystemdoes
notallowarmingtoStaymode
withawirelesskeypad.Allopen
sensorsmustbebypassedatthe
ControlPanelfirst.
Away Mode
ToarmthesystemtoAwaymodeusinga
wirelesskeypad:
1 AttheHomescreen,tapSecurity.
2 AttheSecurityscreen,tapArm.
3 Enteravalidusercode.
4 TaptheAwaybutton.
5 IfQuickArminghasbeenprogrammed
byyourinstaller,justtaptheAway
button
NOTE: Ifanyperimeterdoororwindow
sensorsareopen,thesystemdoes
notpermityoutouseawireless
keypadtoarmthesysteminAway
mode.Allopensensor‐protecte d
doorsandwindowsmusteitherbe
closedorbypassedattheControl
Panelbeforearmingwitha
wirelesskeypad.
Disarm with a Keypad
TodisarmthesystemfromStayorAway
mode,enterausercode.
Activate a Fire Emergency
Totriggeranemergencyfirealarmusinga
wirelesskeypad,pressandholdtheFire
buttonfortwo(2)seconds.
NOTE: Touseawirelesskeypadto
triggerafirealarm,thisoption
mustalreadybeenabledbyyour
installer.
Activate a Police Emergency
Totriggeranemergencypolicealarmusinga
wirelesskeypad,pressandholdthePolice
buttonfortwo(2)seconds.
NOTE: Touseawirelesskeypadto
triggerapolicealarm,thisoption
mustalreadybeenabledbyyour
installer.

2gig Technologies GC2 Specifications

General

Brand	2gig Technologies
Model	GC2
Category	Security System
Language	English