42 CHAPTER 3: INSTALLING NIC SOFTWARE IN WINDOWS
Windows NT 3.51
To install the network driver:
1 Turn on the power to the PC.
2 In the Main window of the Program Manager,
double-click the Control Panel icon and then the
Network icon.
3 Click Add Adapter.
The Add Network Adapter window appears.
4 Open the Network Adapter Card list box, and
scroll down and select <Other> Requires disk
from manufacturer.
5 Click Continue.
The Insert Disk dialog box appears.
6 Insert the EtherCD in the CD-ROM drive. Make
sure that d:\ appears in the entry box, where d:\
represents the letter name of the CD-ROM drive, and
then click OK.
The Select OEM Option window appears.
7 Make sure that the name of the NIC is selected, and
then click OK.
Files are copied. The Network Settings window appears.
The name of the installed NIC appears in the list of installed
adapter cards.
8 Click OK.
If the TCP/IP Configuration screen appears, enter the
requested information for your network environment.
Refer to your system administrator or the Windows NT
documentation for assistance.
If the TCP/IP Configuration screen does not appear, the
installation is complete.
9 Restart the PC.
The installation is complete. Go to the next section,
“Verifying Successful Installation,” to confirm that the
NIC is properly installed.
book Page 42 Thursday, July 29, 1999 12:23 PM
To Next Page
Loading...
