88 APPENDIX B: INSTALLING THE DYNAMICAccess LAN AGENT
To configure the DynamicAccess LAN agent on a local PC:
1 Double-click the 3Com DynamicAccess icon in the
Windows Control Panel.
The Traffic Prioritization tab of the DynamicAccess Setup
screen appears.
2 Select the tab containing the information you want
to configure.
Traffic Prioritization — Allows you to prioritize
applications, which can ease bottlenecks in your network
and allow critical applications to take network precedence.
Fast IP — Allows you to enable and configure Fast IP.
Administration — Allows you to set DynamicAccess
control panel access, set VLAN options, enable efficient
multicast control, and enable the prioritizing of traffic.
Removing DynamicAccess Technology
For instructions on removing the DynamicAccess LAN agent
from your PC, see the DynamicAccess Software User Guide.
This user guide can be accessed on the EtherCD or it can be
downloaded from:
http://www.3com.com/dynamicaccess
For specific instructions on configuring any of the
DynamicAccess technology options, click Help on the
3Com DynamicAccess screen or go to:
http://www.3com.com/dynamicaccess
book Page 88 Thursday, July 29, 1999 12:23 PM
To Next Page
Loading...
Need help?
General
