80 APPENDIX A: SPECIFICATIONS AND CABLING REQUIREMENTS
3C905B NICs Specifications
IEEE 802.1p/Q
IEEE 802.1Q VLAN Tagging
RMON
Microsoft PC97
Microsoft PC98
Microsoft PC99
Net PC
PCI 2.2
DMI 2.0 and 2.0s
ACPI 1.0
Wired for Management 1.1a, 2.0
Pre-OS boot protocol support (PXE, BootP/DHCP, NCP, RPL)
Hardware
Bus interface PCI Local Bus Specification, Revision 2.1
32-bit bus
PCI master Supports bus master scatter-gather DMAs.
Dimensions -TX, -TX-M, -TX-NM:
Height: 8.57 cm (3.57 in)
Length: 12.07 cm (4.75 in)
-COMBO
Height: 10.033 cm (3.950 in)
Length: 17.459 cm (6.874 in)
-FX
Height: 9.53cm (3.75 in)
Length: 12.07cm (4.75 in)
Power requirement +5 V ±5% @ 650 mA maximum
Network Interface
10 Mbps Ethernet
10BASE-T
Ethernet IEEE 802.3 industry standard for a 10 Mbps
baseband CSMA/CD local area network
100 Mbps Ethernet
100BASE-TX
Ethernet IEEE 802.3u industry standard for a 100 Mbps
baseband CSMA/CD local area network
100 Mbps Ethernet
100BASE-FX
Ethernet IEEE 802.3q industry standard for
100BASE-FX
(continued)
book Page 80 Thursday, July 29, 1999 12:23 PM
To Next Page
Loading...
