Installing the NetWare Server Driver 51
Installing the NetWare Server Driver
This section describes how to install the NetWare driver on
a Novell server running NetWare 3.x, 4.x, or 5.x.
The \NWSERVER\NW3.x directory contains the network
driver file (3C90X.LAN) to be used for servers running
NetWare 3.x.
The \NWSERVER directory contains the network driver file
(3C90X.LAN) to be used for servers running NetWare 4.x
or 5.x.
Additional files (NetWare Loadable Modules [NLMs])
that are required for servers running NetWare are on
the EtherCD in the \NWSERVER directory, or they can
be obtained from Novell.
Obtaining NetWare Loadable Modules
You can obtain current NLMs for the NetWare servers listed
in the table below from the Novell World Wide Web site:
http://www.support.novell.com
The EtherLink PCI NICs do not support NetWare 3.xx or
4.xx servers that are not updated to the latest driver pack.
NetWare Server NLM Name
NetWare 3.12 ETHERTSM.NLM
NBI31.NLM
MSM31X.NLM
NetWare 4.10, 4.11 ETHERTSM.NLM
NBI.NLM
MSM.NLM
NetWare 5.x ETHERTSM.NLM
MSM.NLM
book Page 51 Thursday, July 29, 1999 12:23 PM
To Next Page
Loading...
Need help?
General
