3D Systems ProX DMP 200 - First Aid Section - What to do

13D SYSTEMS, INC.
1
INTRODUCTION
OVERVIEW
The ProX
®
DMP200 is a high quality direct metal printing (DMP) machine. It brings reliability and repeatability to production-
level direct metal printing. The ProX
®
DMP200 is designed to meet industrial market demands of reliable, high material
quality and low maintenance 3D printing machines.
With direct metal printing, parts are built up layer by layer. Using this technique, the most complex parts can be made.
Loose metal powder particles are melted together by a high-precision laser. The laser is directed to the powder particles
in order to selectively build up thin subsequent horizontal layers. Connecting each new layer to the previous one, it brings
a high quality alternative to the traditional manufacturing processes. Since no tools are used and no material is removed,
waste is reduced signicantly. Parts aren’t built by removing material in different steps, but by adding material. Other
advantages are the quick set up times and the ability to produce very complex assemblies as a single part.
The ProX
®
DMP200 has a build platform of 140 x 140 x 100mm which can produce high quality parts in a variety of metals.
In order to operate the machine safely and eciently, please follow the following instructions and warnings. The machine
is a Class I Laser System equipped with a Class IV laser that can be potentially dangerous when the machine is operated
differently than stated in this manual.
The principal technical characteristics are mentioned on the table :
Fiber Laser P=300 W – λ=1070 nm
Layering system Adjustable
Building volume 140 x 140 x 100 mm
Metal materials Stainless steel, tool steels, non-ferrous alloys, super alloys…
Ceramic materials Alumina, cermet, …
Repeatability x=20 µm ; y=20 µm ; z=20 µm
Detail size x=100 µm ; y=100 µm ; z=20 µm
Loading system Semi-automatic
Recycling system External option
CAD/CAM software 3DXpert
Control software PX Control V2
CAD read formats STL
"Dental" conguration
The ProX® DMP200 system, in its "Dental" conguration, is a solution for the rapid manufacturing by laser sintering to
perform directly, without tools, xed and removable dental prostheses.
"Dental" conguration includes the exclusive use of Cobalt Chrome Molybdenum alloy powder ST2724G certied as a
medical device in a standard ProX® DMP200 machine associated with ProX DMP Dental CAM software including all non-
modiable manufacturing parameters by the user.
In the case of a different use of the conditions dened by the "Dental" conguration - as the use of another powder in the
machine or modication of the manufacturing parameters - the conformity of dental components built with the machine
is not guaranteed by the manufacturer anymore. It will be then the responsibility of the user to qualify the manufactured
dental elements in compliance with standards and regulatory requirements of each country.
CONTROL SOFTWARE VERSION
All gures and features related to the user interface on this user guide correspond to control software from version
V2.1.5.2.