713D SYSTEMS, INC.
6
USER MAINTENANCE
Described here are the servicing and preventive maintenance procedures that are required in the day to day operation of
the ProX® DMP 200 printer. The following safety rules are applicable for all procedures.
Caution : the machine is not allowed to run a job during a maintenance.
Caution : perform only tasks you are authorized and certied to complete.
Caution : presence of metal powder. Do not use or manipulate any material without rst reading the
safety datasheet (SDS) for that specic material.
Caution : Personal Protective Equipment (PPE) must be used to protect the user against health or safety
risks during working tasks. Wear disposable rubber gloves (and leather gloves when using a vacuum
cleaner), anti-static coverall, anti-static safety shoes and safety glass. Wear disposable dust mask rated
FFP3 or N99 level protection at minimum ; we recommend the use of powered air-purifying respirator.
WARNING : FINE METAL DUST IS HIGHLY FLAMMABLE. AVOID USING ANY IGNITION SOURCE NEAR THE
MACHINE (OPEN FLAME, SPARKING, ELEVATED TEMPERATURE PARTS).
SERVICING : REPLACEMENT PROCESS FILTERS PROCEDURE
ITEM SPECIFICATION
1500
HOURS
External Filter vessel Replace X
To Next Page
Loading...
Need help?
General
