3D Systems ProX DMP 200 User Manual

933D SYSTEMS, INC.
Cabinet lter replacement
The left door of the control/supply cabinet is equipped with lter that must be replaced every 6 months.
Parts required :
• Part number 5007129C00 - quantity = 1.
Procedure:
1. Open the left door of the cabinet.
2. Remove the lter grid from the door.
3. Replace the lter with the new one.
4. Ret the lter grid on the door.
5. Close the left door of the cabinet.

3D Systems ProX DMP 200 Specifications

General

Brand	3D Systems
Model	ProX DMP 200
Category	3D Printers
Language	English