893D SYSTEMS, INC.
Gas lter replacement
The gas lter must be replaced every 6 months. The gas lter is located under the front doors.
Part required :
• Filter element : 1001884R00.
1. Make sure the gas and purge are not activated.
2. Open the access door located below the fronts door of the machine (1).
3. Remove the lter guard from the lter cap by unscrewing it (2).
Caution : Wear disposable rubber gloves and leather
gloves during the lter guard removal.
4. Remove the lter element. Dispose of it in accordance with all local/regional/national, state and federal regulations.
WARNING : FLAMMABLE POWDERS.
PLACE THE USED FILTER ELEMENT IN A CLOSED METALLIC CONTAINER IN A ROOM WITH FIRE DETECTION.
5. Clean the lter guard with the use of a damp cotton cloth.
6. Install the new lter element.
7. Install the lter guard.
8. Close the access door located below the main cabinet.
1
Filter cap
Filter guard
2
To Next Page
Loading...
Need help?
General
