833D SYSTEMS, INC.
13. Clean the cover panel (inside and outside) with the use of damp cotton cloth to neutralize any presence of the
condensate (black particle aspect).
14. Clean the sides of the enclosure with the use of a damp cotton cloth to neutralize any presence of the condensate
(black particle aspect).
15. Remove any presence of powder on the enclosure with the use of a natural ber brush and a vacuum cleaner.
16. Put back the cover panel and secure it by tightening the screws.
17. Gather the control/supply cabinet and the main cabinet together.
Metal particle
condensate
- Highly
combustible
To Next Page
Loading...
