Pannoramic SCAN II 2.2.0 User’s Guide 5.3.1 General functions at the main menu
Load / Save Plan menu – Opens a drop-down menu including the following:
• Load plan – The previously saved scanning plan can be loaded.
• Save plan – A scanning plan containing all parameters and profile assignment will be saved.
• Load CSV – Rack number, slide position, slide name, profile name, illumination type data
from a CSV file can be loaded.
• Save CSV – Rack number, slide position, slide name, profile name, illumination type data can
be saved to a CSV file.
Profile management for all the magazines – The following profile-related tasks applicable for
the planner can be performed:
• Add current profile to all racks
• Open profile for all racks
• Detach current profile from all racks
• Detach profiles from racks
• Clear planner
• Clear all slide result from every rack
Figure 70 – Profile management for all the magazines menu
Jump to scanned – Loads the planner view of the actual slide during scanning
Settings
Help
January 24, 2020 - Rev. 2 3DHISTECH Ltd. 103(156)
To Next Page
