3DHISTECH Pannoramic SCAN II User Manual

Pannoramic SCAN II 2.2.0 User’s Guide 5 Scanning modes and settings
5 Scanning modes and settings
After microscope initialization, if FL HW option is provided, you can select from the following two
modes:
• Brightfield scanning mode (see chapter 5.1 Brightfield Scanning Mode for more
information)
• Fluorescence scanning mode (see chapter 5.2 Fluorescence Scanning Mode for more
information)
• Option modes
◦ Microscope mode
◦ Settings (see chapter 5.6 Settings and Service for more information)
◦ Services (see chapter 5.6 Settings and Service for more information)
In accordance with the selected mode, the Profile Settings Panel and the Microscope Control Panel
views are modified.
5.1 Brightfield Scanning Mode
Microscope View consist of three different sections:
• Main functions: Located at below the window header, these functions are identical in both
modes.
• Profile Settings panel: Profile settings containing parameters used for scanning.
• Microscope Control Panel: Live microscope movement functions
Figure 18 – Main window of Brightfield Microscope mode
January 24, 2020 - Rev. 2 3DHISTECH Ltd. 52(156)

3DHISTECH Pannoramic SCAN II Specifications

General

Brand	3DHISTECH
Model	Pannoramic SCAN II
Category	Scanner
Language	English