3DHISTECH Pannoramic SCAN II - Progress Features

Pannoramic SCAN II 2.2.0 User’s Guide 5.5 Progress features
5.5 Progress features
The progress is visible both in Microscope and Planner modes whenever there is a running hardware
operation or scanning procedure. Progress content can be therefore different depending on the type
of the running procedure.
The following information is included in the progress log list during scanning:
• Filter
• Elapsed time
• Location
• Slide name
• Free space
• FOV number
January 24, 2020 - Rev. 2 3DHISTECH Ltd. 111(156)