Pannoramic SCAN II 2.2.0 User’s Guide Notes on Warranty
Notes on Warranty
3DHISTECH Ltd. – as the Product Manufacturer – warrants the Pannoramic® SCAN II to be free from
faults in material and workmanship at the moment of installation. Defects must be notified
immediately on identification and maximum efforts must be undertaken in order to the amount of
damage as small as possible. On receiving notice of a fault, the Product Manufacturer will be under
obligation to remove the fault, at his own option, either by providing adequate repair services or by
delivering a faultless product for replacement. No warranty will be accepted in cases of natural wear
(notably, wear and tear parts) or improper product handling.
The Product Manufacturer will refuse any liability in the event of damage resulting from faulty
operation, negligence or unauthorized intervention into the product, notably, from the replacement
of product parts or the usage of accessory parts from other manufacturers. Any such case will void
the user’s claim for warranty.
Except for action which is explicitly described in this User’s Guide, you are prohibited from
performing any kind of maintenance or repair work at the Pannoramic® SCAN II. Only 3DHISTECH
Service personnel or specifically authorized representatives are allowed to handle repair work. In
case of malfunction, contact the 3DHISTECH Service Support first.
January 24, 2020 - Rev. 2 3DHISTECH Ltd. 12(156)
To Next Page
Loading...
Need help?
General
