Pannoramic SCAN II 2.2.0 User’s Guide 4.1.2 Exiting the software
4.1.2 Exiting the software
To exit the software, Click X at the main window header to close the program. Note, that when
exiting the software, the loaded slide will be automatically unloaded.
4.2 Main window functions
Figure 11 – Pannoramic® Scanner 2.2.0 main window
The following functions are available for you to select from at the main menu bar:
Switch between Microscope and Planner modes
Microscope initialization – All motors and the preview camera during start-up
Brightfield mode – the camera set for brightfield scanning is initialized
Fluorescence mode – the camera set for fluorescence scanning is initialized
Remote server hosting – Start and host a live Teleconsultation session (see chapter 5.8 Hosting)
January 24, 2020 - Rev. 2 3DHISTECH Ltd. 36(156)
To Next Page
Loading...
