3DHISTECH Pannoramic SCAN II User Manual

Pannoramic SCAN II 2.2.0 User’s Guide 5.3 Planner mode
5.3 Planner mode
The whole scanning procedure can be planned in this mode. Assign profiles to slides, modify scan-
maps without performing physical loading of slides. In Planner mode not only the scanning of the
actually loaded magazine can be planned, but also profile assignment to slides of prepared virtual
magazines is available to be performed. It is also possible to scan to different locations with each
profile, and virtual slides can be created and stored in different folder or server.
Planner module offers you three window layout types for planning scans, located under the
Preferences / Planner Layout Selector menu:
• – Slide view with card
• – Table
• – Card collection
January 24, 2020 - Rev. 2 3DHISTECH Ltd. 101(156)

3DHISTECH Pannoramic SCAN II Specifications

General

Brand	3DHISTECH
Model	Pannoramic SCAN II
Category	Scanner
Language	English