3DHISTECH Pannoramic SCAN II - Software Description; Starting and Exiting Scanner Software

Pannoramic SCAN II 2.2.0 User’s Guide 4 Software Description
4 Software Description
4.1 Starting / Exiting Pannoramic® Scanner Software
4.1.1 Starting the software
To start the program, double-click on the program icon on the desktop or start it from Start \
Program Files \ 3DHISTECH \ Pannoramic Scanner
After software initialization the user interface is opened and the mode selection icons are displayed.
These three buttons represent Microscope and Planner scanner modes, and the Service mode.
Microscope mode
• for digitization of individual slide or individual rack
• set scanning profile of the slide
• run Live teleconsultation
• use Live microscope
Planner mode
• plan the entire scanning procedure
• assign one or more profiles to each slide
• define Brightfield and Fluorescence or mixed scanning mode within a run
• define scanning profile to slides included in racks or magazines
• automated scanning mode
Service mode
• service password
• camera settings
• image compensation
• barcode settings
• microscope control
January 24, 2020 - Rev. 2 3DHISTECH Ltd. 35(156)