3DHISTECH Pannoramic SCAN II - Page 132

Pannoramic SCAN II 2.2.0 User’s Guide 5.8 Using Profiles
• Use saved scan area
• Use selection box (ON/OFF)
Fluorescent settings
• Filter position(s)
• Selected focus channel
• Selected stitching channel
• Flat field correction (ON/OFF)
• Intensity statistics
• Intensity reducing
• Intensity equalization
• Sharpening (ON/OFF)
• Use of skip empty field-of-views (ON/OFF)
• Do not use extended focus on empty field-of-views (ON/OFF)
• Custom extended focus
Other settings
• Limitation of focus range (ON/OFF)
• Enable/disable Multilayer options
• Use of extended focus or Z-stack step size and focus level
• Output resolution
January 24, 2020 - Rev. 2 3DHISTECH Ltd. 132(156)