3DHISTECH Pannoramic SCAN II User Manual

Pannoramic SCAN II 2.2.0 User’s Guide 6.4.5 Transporting Pannoramic® SCAN II
Caution!
Do not use the blue guide rail bar (1) to raise, shift or transport the
Pannoramic® SCAN II!
Note:
The base unit has four carrying handles for transporting. Two or four
people can carry the base unit using these carrying handles. To
determine the appropriate number of transporter people, observe the
laws of your country regarding load carrying capacity limitations. You
can find the weight data of the base unit in chapter 7. Technical Data.
To transport the Pannoramic® SCAN II do the following:
1. Turn power supply off and detach all cables.
2. Pull carrying handles out (2) until mechanical stop position (A).
3. Turn carrying handles by 90° (B) towards the base unit to secure them.
4. Now you can transport Pannoramic® SCAN II with the help of another person.
5. After finishing transportation, push carrying handles back into normal position (C).
January 24, 2020 - Rev. 2 3DHISTECH Ltd. 145(156)

3DHISTECH Pannoramic SCAN II Specifications

General

Brand	3DHISTECH
Model	Pannoramic SCAN II
Category	Scanner
Language	English