Pannoramic SCAN II 2.2.0 User’s Guide 5.2.1 Profile Settings panel
◦ Everything within marker
To scan everything within the marked area, check the Everything within marker selection
box.
Alternatively, click in the preview window to activate this function.
Figure 40 – Scan everything within the marked area (selected / not selected)
• Threshold enhancement
◦ Remove coverslip – If selected, the edges of the coverslip are not detected as specimen
to be scanned. Depending on the threshold level, it is possible that the edges of the
coverslip are detected as areas to be digitized.
Figure 41 – Preview image with and without coverslip edge
January 24, 2020 - Rev. 2 3DHISTECH Ltd. 79(156)
To Next Page
Loading...
