3DHISTECH Pannoramic SCAN II User Manual

Pannoramic SCAN II 2.2.0 User’s Guide 5.2.2 Microscope Control Panel
Marker
If Scan area inside the marker is selected in the Preview panel, the
preview camera detects the marker pen. The inside areas appear in red
color and will be digitized.
Areas scanned in
This color is only displayed during scanning.
Hide all layers
All the layers will be hidden / existing but not visible. The original preview
image is shown but layer information are still valid. Note, that while this
function is active, none of the other preview functions can be selected.
Separate scanning
Discrete sample areas will be scanned separately as individual slides. If
there are two samples on a slide, two separate virtual slides will be
created.
NOTE: Discrete areas are numbered in the preview window. You can select
up to 650 discrete areas. All discrete areas are scanned, please make sure
to activate the Remove specks function.
Show pre-scans pseudo-colorized
Figure 52 – Pseudo-colorized pre-scan image
January 24, 2020 - Rev. 2 3DHISTECH Ltd. 93(156)

3DHISTECH Pannoramic SCAN II Specifications

General

Brand	3DHISTECH
Model	Pannoramic SCAN II
Category	Scanner
Language	English