Operational, Basic, and Advanced Parameters
A-96 41-001343-02 REV05 – 07.2014
Parameter –
802.1x root and intermediate
certificates
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the file name that contains the root and intermediate certificates related to
the local certificate.
You can use this parameter in three ways:
• To download no certificates
• To download a certificate from the original configuration server
• To download a certificate from another specified server
To download a specific file, the string value MUST HAVE A FILENAME at the end of the
string. For example:
802.1x root and intermediate
certificates:ftp://admin:admin!@1.2.3.4:50/path/phones802RootCert.pem
where “path” is the directory and “phones802RootCert.pem” is the filename. If you do
not specify a filename, the download fails.
See examples for each below.
Format String
Default Value Not Applicable
Range Not Applicable
Example The following example downloads no 802.1x root and intermediate certificate file:
802.1x root and intermediate certificates:
The following example downloads the 802.1x root and intermediate certificate file
from the original configuration server.
802.1x root and intermediate certificates: phones802RootCert.pem
The following example uses FTP to download the firmware file
“phones802RootCert.pem” (802.1x root and intermediate certificate file) from the
“path” directory on server 1.2.3.4 using port 50:
802.1x root and intermediate certifi-
cates:ftp://admin:admin!@1.2.3.4:50/path/phones802RootCert.pem
To Next Page
Loading...
