Aastra 6730I - Page 703

Operational, Basic, and Advanced Parameters
41-001343-02 REV05 – 07.2014 A-97
Parameter –
802.1x local certificate
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the file name that contains the local certificate.
You can use this parameter in three ways:
• To download no certificates
• To download a certificate from the original configuration server
• To download a certificate from another specified server
To download a specific file, the string value MUST HAVE A FILENAME at the end of the
string. For example:
802.1x local certificate:ftp://admin:admin!@1.2.3.4:50/path/phones802LocalCert.pem
where “path” is the directory and “phones802LocalCert.pem” is the filename. If you do
not specify a filename, the download fails.
See examples for each below.
Format String
Default Value Not Applicable
Range Not Applicable
Example The following example downloads no local certificate file:
802.1x local certificate:
The following example downloads the local certificate file from the original configura-
tion server.
802.1x local certificate: phones802LocalCert.pem
The following example uses FTP to download the firmware file
“phones802LocalCert.pem” (802.1x local certificate file) from the “path” directory on
server 1.2.3.4 using port 50:
802.1x local certificate:ftp://admin:admin!@1.2.3.4:50/path/phones802LocalCert.pem
Parameter –
802.1x private key
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the file name that contains the private key.
Format String
Default Value Not Applicable
Range Not Applicable
Example 802.1x private key: filename.pem