Operational, Basic, and Advanced Parameters
A-98 41-001343-02 REV05 – 07.2014
Parameter –
802.1x trusted certificates
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the file name that contains the trusted certificates.
You can use this parameter in three ways:
• To download no certificates
• To download a certificate from the original configuration server
• To download a certificate from another specified server
To download a specific file, the string value MUST HAVE A FILENAME at the end of the
string. For example:
802.1x trusted
certificates:ftp://admin:admin!@1.2.3.4:50/path/phones802TrustedCert.pem
where “path” is the directory and “phones802TrustedCert.pem” is the filename. If you
do not specify a filename, the download fails.
See examples for each below.
Format String
Default Value Not Applicable
Range Not Applicable
Example The following example downloads no 802.1x trusted certificate file:
802.1x trusted certificates:
The following example downloads the 802.1x trusted certificate file from the original
configuration server.
802.1x trusted certificates: phones802TrustedCert.pem
The following example uses FTP to download the firmware file
“phones802TrustedCert.pem” (802.1x trusted certificate file) from the “path” directory
on server 1.2.3.4 using port 50:
802.1x trusted certifi-
cates:ftp://admin:admin!@1.2.3.4:50/path/phones802TrustedCert.pem
To Next Page
Loading...
