Softkey/Programmable Key/Keypad Key/Feature Key/Expansion Module Key/Hard Key Parameters
41-001343-02 REV05 – 07.2014 A-163
Parameter –
softkeyN line
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description This is the line associated with the softkey you are configuring. The number of applicable
lines available is dependent on the specific IP phone model.
The “softkeyN line” parameter can be set for the following softkey types only:
• speeddial
• blf
• list
• acd
• dcp
• lcr
• blfxfer
• speeddialxfer
• speeddialconf
• speeddialmwi
• redial
• filter
Format Integer
Default Value 1
Range 1 through 9
Example softkey1 line: 1
softkey2 line: 5
To Next Page
Loading...
