ABB ACS150 series

Fault tracing
132
CODE
FAULT
CAUSE
WHAT TO DO
F0201
DSP T1
OVERLOAD
System error
Contact your local ABB representative.
F0202
DSP T2
OVERLOAD
F0203
DSP T3
OVERLOAD
F0204
DSP STACK
ERROR
F0206
MMIO ID ERROR
Internal I/O Control board (MMIO)
fault
Contact your local ABB representative.
F1000
PAR HZRPM
Incorrect speed/frequency limit
parameter setting
Check parameter settings. Following must apply:
2007 MINIMUM FREQ < 2008 MAXIMUM FREQ,
2007 MINIMUM FREQ/9907 MOTOR NOM FREQ
and 2008 MAXIMUM FREQ/9907 MOTOR NOM
FREQ are within range.
F1003
PAR AI SCALE
Incorrect analog input AI signal
scaling
Check parameter group 13 ANALOG INPUTS
settings. Following must apply:
1301 MINIMUM AI1 < 1302 MAXIMUM AI1.