• Electrical installation (page 39) tells how to check the insulation of the assembly
and the compatibility with IT (ungrounded) and corner-grounded TN systems as
well as connect power cables and control cables.
• Installation checklist (page 49) contains a checklist for checking the mechanical
and electrical installation of the drive.
• Start-up and control with I/O (page 51) tells how to start, stop, change the
direction of the motor rotation and adjust the motor speed through the I/O
interface.
• Control panel (page 57) describes the control panel keys, LED indicators and
display fields and tells how to use the panel for control, monitoring and changing
the settings.
• Application macros (page 69) gives a brief description of each application macro
together with a wiring diagram showing the default control connections. It also
explains how to save a user macro and how to recall it.
• Actual signals and parameters (page 79) describes actual signals and
parameters. It also lists the default values for the different macros.
• Fault tracing (page 127) tells how to reset faults and view fault history. It lists all
alarm and fault messages including the possible cause and corrective actions.
• Maintenance (page 133) contains preventive maintenance instructions.
• Technical data (page 137) contains technical specifications of the drive, such as
ratings, sizes and technical requirements as well as provisions for fulfilling the
requirements for CE and other marks.
• Dimension drawings (page 155) shows dimension drawings of the drive.
• Appendix: Process PID control (page 161) contains instructions on quick
configuration of the process control, gives an application example and describes
the PID sleep functionality.
• Further information (page 169) (inside of the back cover, page 169) tells how to
make product and service inquiries, get information on product training, provide
feedback on ABB Drives manuals and find documents on the Internet.
Related documents
See List of related manuals on page 2 (inside of the front cover).
Categorization according to the frame size
The ACS150 is manufactured in frame sizes R0...R2. Some instructions and other
information which only concern certain frame sizes are marked with the symbol of
the frame size (R0...R2). To identify the frame size of your drive, see the table in
section Ratings on page 137.
To Next Page
Loading...
