ABB FSM4000 - Page 93

FSM4000 ELECTROMAGNETIC FLOWMETER | OI/FSM4000-EN REV. E 93
Submenu / parameter Value range Remark
Submenu
Import the current data set in a Fingerprint.
Transfer
As Product1 Copies the current data set in the Fingerprint ‘as Product1’.
Accept Yes, exit via C/CE
Yes → Enter
As Product2 Copies the current data set in the Fingerprint ‘as Product2’.
Accept Yes, exit via C/CE
Yes → Enter
As Startup Copies the current data set in the Fingerprint ‘as Start-up’
(commissioning fingerprint).
Accept Yes, exit via C/CE
Yes → Enter
Submenu
Adjustment
Submenu
Enter the current coil temperature to readjust the coil
resistance at 20 °C. Perform adjustment only on a ‘cold’
device. See page 97 in this regard.
Coil Temp
Temp. in °C -100 ... 100
0.0