ABB i-bus
®
KNX
Maintenance and cleaning
ABA/S 1.2.1 | 2CDC509086D0201 107
10 Maintenance and cleaning
10.1 Maintenance
The device is maintenance-free. In the event of damage (e.g. during transport and/or storage), do not carry
out any repairs.
10.2 Cleaning
The voltage supply to the device must be switched off before cleaning. If devices become dirty, they can
be cleaned using a dry cloth or a cloth dampened with a soapy solution. Never use corrosive agents or
solutions.
To Next Page
Loading...
