ABB i-bus KNX ABA/S 1.2.1 - Constant (CONST)

ABB i-bus
®
KNX
Parameters
94 2CDC509086D0201 | ABA/S 1.2.1
7.10.34 Constant (CONST)
Description
The constant can be used, for example, for the purposes of comparison with other input variables. The
constant never triggers a recalculation.
Outputs
No. DPT Abbr. Name Visible Description
1 Any O Output Always
Parameters
Name Value Visible Description
Constant
Value
According to DPT Always
For entering a constant value.
Selecting the checkbox sets the initial value to 1, but
only with 1-bit values. Deselecting it sets a value of 0.