ABB i-bus KNX ABA/S 1.2.1 User Manual

ABB i-bus
®
KNX
Product Overview
18 2CDC509086D0201 | ABA/S 1.2.1
3.3.4.2 Device type
Device type
Logic Controller
ABA/S 1.2.1
Application
Logic Controller/…*
Maximum number of group objects 500
Maximum number of group addresses 2000
Maximum number of assignments
2000
Maximum number of logic elements
3000
WebUI inputs and
outputs
60
* … = Current version number of the application. Please refer the software information on our homepage for this.
Table 6: Device type
Note
ETS and the current version of the device application are required for programming.
The latest version of the application and corresponding software information is available for download
from www.abb.com/knx. After import into ETS, it appears in the Catalogs window under
Manufacturers/ABB/Controller/Controller Output.
The device does not support the locking function of a KNX device in ETS. Using a BCU code to inhibit
access to all the project devices has no effect on this device. Data can still be read and programmed.

ABB i-bus KNX ABA/S 1.2.1 Specifications

General

Brand	ABB
Model	i-bus KNX ABA/S 1.2.1
Category	Controller
Language	English