ABB i-bus KNX ABA/S 1.2.1 - In Operation Parameters; Send Group Object In Operation (1-Bit); In Operation Is Repeated Every

ABB i-bus
®
KNX
Parameters
36 2CDC509086D0201 | ABA/S 1.2.1
7.7 In operation parameters
7.7.1 Send Group Object "In Operation" (1-bit)
Options:
No
Send value 0 cyclically
Send value 1 cyclically
The In operation group object indicates that the device is communicating correctly with the KNX bus.
Depending on the setting, a 0 or 1 is sent cyclically and activates the 1-bit group object In operation.
The cyclical telegram can be evaluated by other devices on the bus.
7.7.2 "In Operation" is repeated every
Options:
00:00:01…01:00:00…11:59:59 hh:mm:ss