ABB i-bus KNX ABA/S 1.2.1 - Engine Settings Parameters; Cycle Time; Use Persisting Values; Send Behavior Parameters

ABB i-bus
®
KNX
Parameters
ABA/S 1.2.1 | 2CDC509086D0201 35
7.5 Engine settings parameters
7.5.1 Cycle time
Options:
200...65535 (unsigned integer)
Defines the minimum time for the logic engine calculation cycle.
7.5.2 Use persisting values
Options:
no (no checkmark)
yes (checkmark)
• yes: The device stores the internal information of certain function elements. To see which data are
saved, please refer to the descriptions for the relevant function elements.
7.6 Send behavior parameters
7.6.1 Minimum time between output telegrams in [s]
Options:
0...255 s (unsigned integer)
7.6.2 Minimum time between output telegrams in [ms]
Options:
0...2000 ms (unsigned integer)
Note
The parameters Minimum time between output telegrams in [s] and Minimum time between output
telegrams in [ms] refer both to "normal" KNX telegrams and ValueRead telegrams.