ABB i-bus KNX ABA/S 1.2.1 User Manual

ABB i-bus
®
KNX
Parameters
98 2CDC509086D0201 | ABA/S 1.2.1
7.10.38 Function Block Output (FB OUT)
Description
The output of a user-defined function block. If you wish to use the same logic several times, you can
combine and save it in a function block. In such cases the function block output is used in place of a KNX
output.
Outputs
No. DPT Abbr. Name Visible Description
1 Any I Input Always
Parameters
Name Value Visible Description
Short
description
According to DPT Always Default: O
Full
description
According to DPT Always Default: Out
Index According to DPT Always Default: 0

ABB i-bus KNX ABA/S 1.2.1 Specifications

General

Brand	ABB
Model	i-bus KNX ABA/S 1.2.1
Category	Controller
Language	English