ABB i-bus
®
KNX
Parameters
ABA/S 1.2.1 | 2CDC509086D0201 59
7.10.17 Multiplexer, 2 to 1 (1-MUX)
Description
Selects one of two input values.
Inputs
No. DPT Abbr. Name Visible Description
1 1 bit S Select Always
2 Any I
0
Input value Always
3 Any I
1
Input value Always
Outputs
No. DPT Abbr. Name Visible Description
1 1 bit O Output Always
Parameters
Name Value Visible Description
Send trigger
yes
no
Checkbox:
yes: The output sends when Select receives a value.
no: The output does not send when Select receives a value.