ABB i-bus KNX ABA/S 1.2.1 - Page 58

ABB i-bus
®
KNX
Parameters
58 2CDC509086D0201 | ABA/S 1.2.1
Function
Input F defines, if MIN or MAX function is activated.
If F = 0, the output sends the largest input value (E1-E16). Function MAX is activated.
If F = 1, the output sends the smallest input value (E1-E16). Function MIN is activated.
The output sends:
• On a value change at the output (new input values will be set).
• When input F receives a value
Exception handling
Unlinked inputs are not taken into account.
Other
If only one input is linked, the output value is the same as the input value.