ABB i-bus KNX ABA/S 1.2.1 - General Information; Using the Product Manual; Legal Disclaimer and Symbols

ABB i-bus
®
KNX
General
ABA/S 1.2.1 | 2CDC509086D0201 7
1 General
1.1 Using the product manual
This manual provides detailed technical information relating to the function, installation and programming
of the ABB i-bus
®
KNX device.
1.2 Legal disclaimer
We reserve the right to make technical changes or modify the contents of this document without prior
notice.
The agreed properties are definitive for any orders placed. ABB AG accepts no responsibility whatsoever
for potential errors or possible lack of information in this document.
We reserve all rights in this document and in the subject matter and illustrations contained therein.
Reproduction, transfer to third parties or processing of the content – including sections thereof – is not
permitted without the prior written consent of ABB AG.
Copyright© 2018 ABB AG
All rights reserved
1.3 Explanation of symbols
1.
Instructions in specified sequence
2.
► Individual actions
a) Priorities
1)
Processes run by the device in a specific sequence
• 1st-level list
o
2nd-level list
Table 1: Explanation of symbols