ABB i-bus KNX ABA/S 1.2.1 - Page 81

ABB i-bus
®
KNX
Parameters
ABA/S 1.2.1 | 2CDC509086D0201 81
Recurrence – Monthly section parameters
Recurrence cycle in months.
The day of the month on which an event should be triggered every x months.
Fig. 16: Recurrence section parameters – Monthly
Parameter Name Value Description
Day ... of every 1...31, default = 1
The element is activated on a specific day in a
specific month, e.g. every 3rd day of the month.
... month(s) 1...500, default = 1
The element is activated in specific months, e.g.
every 3rd month.
Note
... month(s) starts on the date set in the Duration section.