ABB i-bus KNX ABA/S 1.2.1 - Page 83

ABB i-bus
®
KNX
Parameters
ABA/S 1.2.1 | 2CDC509086D0201 83
Duration section parameters
Before the start date the calendar function is inactive. After the end date the calendar function is inactive.
If no end date is defined the Calendar function is active from the start date onward.
Fig. 18: Duration section parameters
Parameter Name Value Description
Start
Calendar day selector
Default = 01.01.2016
Before this date the element is inactive.
No End Option
No End and End at Date are mutually exclusive.
Selecting No End activates the element
indefinitely.
End at Date:
Option
Calendar day selector
Default = 01.01.2040
See above.
After this date the element is inactive.