Step 2 - Updating the revolution counter with the FlexPendant
Use this procedure to update the revolution counter with the FlexPendant (IRC5).
Action
On the ABB menu, tap Calibration.
xx1500000942
1
All mechanical units connected to the system are shown with their calibration status.2
Tap the mechanical unit in question.
xx1500000943
Continues on next page
232 Product manual - IRB 120
3HAC035728-001 Revision: N
© Copyright 2009-2017 ABB. All rights reserved.
5 Calibration
5.3 Updating revolution counters
Continued
To Next Page
Loading...
