NoteAction
WARNING
Used oil is hazardous material and must be
disposed of in a safe way. See section De-
commissioning on page 371 for more inform-
ation.
7
Tightening torque: 10 Nm.Refit the oil plug.8
Filling oil
Use this procedure to fill oil in the gearbox.
NoteAction
xx0800000330
Move the upper arm to the position shown
in the figure.
1
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot
working area.
2
WARNING
Handling gearbox oil involves several safety
risks. Before proceeding, please read the
safety information in the section WARNING
- Safety risks during work with gearbox
lubricants (oil or grease) on page 55.
3
Continues on next page
174 Product manual - IRB 2600
3HAC035504-001 Revision: G
© Copyright 2009-2015 ABB. All rights reserved.
3 Maintenance
3.4.6 Changing the oil, axis-4 gearbox
Continued
To Next Page
Loading...
